1. Using a dedicated disk for the page file
The trick may be to
maximize your server performance. By default, Windows creates a page
file, taking it as virtual memory. Because Windows will frequently use
this file. This file is the best storage location on a dedicated disk
(note: not a separate volume). These server do will ensure Windows page
file before reading data, but will not need to wait for other
applications to use up the drive.
2.Ensure that your hard disk periodically run the Disk Defragmenter
Today
disk perform continuously read, in fact,very fast. However.when the
disk is requested to read the data stored in scattered, Windows
performance will drop. By running the Disk Defragmenter, you can ensure
that the file can be a sequential manner rather than haphazard stored on
disk, so your sever will read files efficiently.
3. Use the NTFS file system
AS
for server versions of Windows operating systems, NTFS is the default
file system, Windows supports the use of FAT and FAT-32 file system.
I've read every book MSCE training course is recommended to use the NTFS
file system because it is more secure than the FAT and FAT-32 file
system in use. Server performance but these books are not mentioned NTFS
is a process (transaction-based) based file system. This means that
compared to FAT and FAT-32 file system concerned, NTFS file system
faster.
4. Avoid running 16-bit applications
64-bit Windows
operating system does not run 16-bit applications, so that this one is
not a problem for 64-bit operating systems. However, 32-bit Windows
operating system will run 16-bit applications. Windows using
multi-tasking mode prefer to 16-bit applications. Discuss Windows server
performance multi-tasking 16-bit applications will require a separate
opening instructions, but it is certain that running 16-bit applications
will degrade performance.
5. Find memory leaks (memory leaks)
Memory
leak is difficult to be written on the question of the application.
Under normal circumstances, it would be to requests operating system
memory as a application. Typically, when the application is no longer
running, it will release memory to the operating system. If an
application contains a memory leak when it is run, it will make a
request to the memory, but after use, the release of memory make a
failure. When the next time the application needs memory, the amount of
memory that Windows will be required to be more than the last time. Over
time, the amount of memory that Windows can provide for other
applications will be less and less.
Initially, the impact of memory
leaks on system performance is negligible, but when such a leak becomes
more and more time, its impact on system performance will stand out.
6.Remove the rarely use those components
Each
server I ever purchased often installed a wide variety of monitor
logging component. If you can use these components according to your
plan, it is nothing for Server performance to install these
components.but I am surprised that there are many system administrators
who install (or never removed) component on the server that.In fact,it
is a way to a waste of system resources.because they never even been
run.
7. Stop running those services that do not use
In a similar
article, I also recommend browsing the Service Control Manager and close
those that are not used in the service. This will not only be able to
improve our server performance,it can also improve the security of the
server. The computer has a law that describes the code executed.The
chance of insecurity including code will increase.By turning off those
services that do not use.You do that, which is to reduce the size of the
execution of the code and decrease the chance of the server that
contains the security vulnerability being exploited.
8. Log out
This
is another way you can improve server security and performance. When
you no longer use the console,for security reasons, you should log out
operation.At the time you log in, Windows Server will load your user
properties, which will consume memory and CPU.
9. Compact Disk
When
Microsoft released MS-DOS5.0, they presented features its disk
compression. What happened was able to make the hard disk or floppy disk
compression to store more data. When I try to use disk compression
technology, then, my computer is running slow down, I would not go back
to using a compressed disk until recently had no use compression.
Now,
under normal circumstances, the compression is indeed possible to
improve system performance. In a computer, the hard disk is considered
to run the slowest part. However, if you can compress a file, you are
reducing its physical size, which will also reduce the amount of time to
read it from the hard disk.
At the same time, a compressed file must
be decompressed after it is read from disk. Decompression operation
usually takes up memory, and the process will be supplied with some CPU
time. If your server is running a disk enhanced application to solve a
large number of decentralized file (not a database), the implementation
of compression can improve system performance.
10. Adjust the server response
The
difference between PC and server is that the personal computer is not
always there to run the server application from the server console.Then,
the optimization is to obtain priority from server applications to the
background.
You can open the server's control panel, and double-click
the System icon. When a window is displayed in the System Properties
tab, go to the "Advanced" tab items, find the performance settings
section and click the Settings button. Performance Options window will
be displayed in the Properties tab. Go to the Properties tab of Advanced
Options, and determine the server settings for optimal performance as a
background service.
If you like the article,plz thumbs up.I am Thomas Edison from https://www.vpb.com/promotion.php/?fuid=284
No comments:
Post a Comment